Olympus DS-50 - Power Supply; Turning On and Off the Power

Power Supply
When the recorder is not being used, turn the power off to reduce battery
consumption to a minimum. Even if the power
is turned off, existing data, mode
settings, and clock settings will be maintained.
8
Turning On the Power
While the recorder's power is off, slide the
POWER/HOLD switch in the direction
indicated
by the arrow.
The display will turn on, and, after "System Check"
appears, the power will
be turned on. The resume
function will bring the recorder back to the stop
position
in memory before power was turned off.
Turning Off the Power
Slide the POWER/HOLD switch in the
direction indicated
by the arrow for 0.5
seconds or longer.
The display shuts off and the power will be turned
off. The resume
function remembers the stop
position before the power is turned off.