Olympus DSX1000 Quick Reference Guide

Operating procedure
Reference information
Introduction
Basic
2
Preparation for observation
Sample set
1. Start the system (in a state of bright-field observation).
2. Set a sample on the stage.
3. Move the zoom head to bring the sample into focus.
4. Move the stage back/forth and left/right to place the
position desired to be observed on the center.
* For “Up/Down movement of zoom head”, “Back/Forth and Left/Right movement of stage”, and “Usage of Focus assist bar”, please refer to the Instruction Manual.
Selection of
observation modes
Image processing
method
Image acquisition
Saving acquired
images
Software Console
Useful
operation
* Pulling out the Focus assist bar helps
you to roughly find the focus point.
3. [▲/▼] button
Moves up and down the
zoom head.
4. [Joystick]
Moves the motorized stage.
Preparation for
observation
2
4. [Move] button
Moves the motorized stage.
3. [Move focus] button
Moves up and down the
zoom head.

Olympus DSX1000 Specifications

General

Brand	Olympus
Model	DSX1000
Category	Microscope
Language	English