3
Select the best image
1. Click the [Best image] button.
2. Click the [ALL MODES] button from the [Find best image] tab.
3. Select the desired image on the best image screen.
4. Click the [Apply] button.
Software
Useful
operation
[◄/►] button
Changes the observation modes
sequentially.
* Direct observation mode is also available.
Console
[Observation mode] button
Changes to the appropriate
observation mode.
Operating procedure
Basic
Selection of
observation modes
Image processing
method
Image acquisition
Saving acquired
images
Preparation for
observation
3
Selection of observation modes
3. Best image screen
Select the desired image
on the best image screen.
2.
[ALL MODES] button
4. [Apply] button
1. [Best image] button