1
Loading the card.
• Slide the card
in
until
it is
locked
into
place.
~
"Card basics"
(P.
1
06)
(/)
Cautions
•
Turn off the camera before loading
or
removing the card.
2
Closing the battery/card compartment cover.
• Close
the cover and slide
the battery/card
compartment
lock
in
the direction shown
by the arrow.
(/)
Cautions
•
Be sure the battery/card compartment cover is closed
before using the camera.
Removing the card
Press the inserted card
lightly
and it
will
be ejected.
Pull
out the card.
(/)
Cautions
• Do not remove the battery
or
card
while
the card
write indicator
(P.
22) is
displayed.
FlashAir and Eye-Fi Cards
• "FiashAir''
cards cannot be formatted. Use the software
supplied
with the
FlashAir
card
to format the card.
•
Use the
FlashAir
or Eye-Fi card
in
compliance
with the
laws
and
regulations
of
the
country where the camera is used. Remove the
FlashAir
or Eye-Fi card from the
camera
or
disable the card functions in airplanes and other
locations
where use is
prohibited.
~
"Using
the Smartphone
connection option"
(P.
70), [Eye-Fi]
(P.
80)
• The
FlashAir
or
Eye-Fi card may become hot during use.
• When using a
FlashAir
or
Eye-Fi card, the battery may run out faster.
•
When using a
FlashAir
or Eye-Fi card, the camera may function more slowly.
• If
you set the write protect switch
of
a
FlashAir
card to the
"LOCK"
side, you will
not be
able
to use the wireless
LAN function.
To Next Page
Loading...
