1
Attach a
lens
to the camera.
Rear
cap
• Align the
lens
attachment mark (red) on the camera with the
alignment
mark (red) on
the
lens,
then insert the
lens
into the camera's body.
•
Rotate the
lens
in
the direction indicated by the arrow until
you hear it
clicks.
(/)
Cautions
•
Make sure the camera is turned off.
•
Do not press the
lens release
button.
•
Do not touch
internal
portions
of
the camera.
2
Remove the
lens
cap.
Using
lenses with an UNLOCK
switch
Retractable lenses
with an UNLOCK
switch cannot
be used while
retracted. Turn the zoom ring
in
the
direction
of
arrow
(G))
to extend the lens
(@).
To
store, turn the zoom ring
in
the direction
of
arrow
(@)while
sliding
the
UNLOCK
switch(@).
Removing the lens from the camera
While
pressing the
lens release
button, rotate the
lens
in
the direction
of
the arrow.
Interchangeable lenses
Read "Interchangeable lenses"
(P.
1
07).
Lens
release
button