Olympus E-PL6 - Page 147

10
EN
Power on
1 Press the
ON/OFF
button to turn on the camera.
•
When the camera is turned on, the
(blue)
power
lamp will light
and the monitor
will
turn on.
•
To
turn off the power, press the
ON/OFF
button again.
Using the monitor
•
ON/OFF
button
•
Monitor
Battery level
lr1~!
(green): Camera ready to shoot.
Displayed
for about 1
0
seconds
after the camera is turned on.
I
~~1
(green): Low battery
c::1J
(blinks
red): Charge the battery.
Available
recording time
Number
of
storable
still pictures
You
can adjust the
angle
of
When set to the
angle
to take your
the monitor. own picture, the monitor display
up/
down direction inverts.
Camera
sleep
operation
If no operations are performed for a minute, the camera enters
"sleep"
(stand-by) mode
to
turn off the monitor and to
cancel all
actions. The camera activates again when you touch
any button (the shutter button,
IE]
button, etc.). The camera
will turn off
automatically if
left
in
sleep mode for 5 minutes. Turn the camera on again before use.