20
Chapter 2 Instrument Nomenclature and Specifications
EVIS EXERA II TJF TYPE Q180V OPERATION MANUAL
Figure 2.1
To ensure that you do not forget to attach the water-resistant
cap, it is recommended that you connect the chain for
water-resistant cap to the endoscope’s S-cord connector
mount.
1. Confirm that the chain for water-resistant cap is free from cracks, flaws,
wear, deformation, or other damages (see Figure 2.1).
2. Align the notch on the connecting plate with the pin on the venting connector
of the water-resistant cap (MH-553, see Figure 2.2).
3. Place the connecting plate over the venting connector (see Figure 2.2).
4. Confirm that the connecting plate is securely attached to the foot of the
venting connector and can be smoothly rotated (see Figure 2.2).
Figure 2.2
To Next Page
Loading...
