36
Chapter 3 Preparation and Inspection
EVIS EXERA II TJF TYPE Q180V OPERATION MANUAL
7. Align the mark on the videoscope cable EXERA, EXERA II, or 100 with
mark 1 on the endoscope connector and push it in until it stops (see Figure
3.15).
Figure 3.15
8. Turn the connector of the videoscope cable towards mark 2 until it stops
(see Figure 3.15).
9. Confirm that the mark on the videoscope cable is aligned with mark 2 on the
endoscope connector.
10. Connect the suction tube from the suction pump to the suction connector on
the endoscope connector (see Figure 3.16).
Figure 3.16
To Next Page
Loading...
