Chapter 3 Preparation and Inspection
77
EVIS LUCERA GIF/CF/PCF TYPE 260 Series OPERATION MANUAL
Figure 3.20
7. Align the mark on the videoscope cable LUCERA or 200 with mark 1 on the
endoscope connector and push it in until it stops (see Figure 3.21).
Figure 3.21
8. Turn the connector of the videoscope cable towards mark 2 until it stops
(see Figure 3.21).
9. Confirm that the mark on the videoscope cable is aligned with mark 2 on the
endoscope connector.
(1) (2) (3) (4)
Water supply connector
Air supply connector
Water container’s connection adapter
Endoscope connector
Air supply channel
Water supply channel
Metal tip
Mark 2 (gray)
Mark (gray)
Mark 1 (gray)
Videoscope cable
Videoscope cable
To Next Page
Loading...