Olympus FE-26 - Battery and Sound Management; Battery Power Saving and Silent Mode; Battery Type Selection

32 EN
Saving battery power between shots
[ POWER SAVE]
E
SETUP X POWER SAVE
Submenu 2 Application
OFF Cancels [POWER SAVE].
ON
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.
To resume standby mode
Press any button.
Selecting the battery type
[ BATTERY TYPE]
E
SETUP X BATTERY TYPE
Submenu 2 Application
ALKALINE
Select this option when using
alkaline batteries.
NiMH
Select this option when using
NiMH batteries.
If [ALKALINE] is selected with NiMH
batteries, the camera may fail to turn on
when the batteries are low.
If [NiMH] is selected with alkaline batteries,
the camera may be turned off without
displaying the low battery warning (p. 10).
Turning off the camera sounds
[F SILENT MODE]
F
SILENT MODE
Submenu 1 Application
OFF
Button operation sound/warning
sound are not muted.
ON
The electronic sounds (button
operation sound, warning sound)
are muted.
[BEEP] (p. 31)