"Vertical lines appear on the screen".
• Vertical lines may appear on the screen when the
camera
is
pointed at
an
extremely bright subject
under a clear sky and so on. The lines do not
appear, however,
in
the final image.
(D
When
one
of
the
messages
below
is
displayed
on
the monitor,
check
the
corrective action.
Card
problem
• Use
<111:>$
to select [CLEAN
CARD], and press the
@ button. Take
out
the card,
wipe the contact area (p. 52)
with a soft, dry cloth, and then
load the card again.
• Use
<111:>$
to select
[FORMAT], and press the
@ button. Next, use
<111:>$
to select
[yES],
and press the
@
button:
2
Card problem
• Replace the card.
• Erase unwanted
images:'
Card problem
Use a computer to cancel the
read-only setting.
Internal
memory
problem
• Insert a card.
• Erase unwanted
images:'
Card problem
Insert a
new
card.
m
WRITE
PROTECT
m
CARD
FULL
m
CARD
ERROR
ill
MEMORY
FULL
Internal
memory
problem
Use
<111:>$
to
select
[MEMORY
FORMAT], and press the
@ button. Next, use
<111:>$
to select
[yES],
and press the
L...----...::::.;.=.II@button:
2
"The
light
is
caught
in the
picture"
• Shooting with flash
in
dark situations results
in
an image with many flash reflections on dust
in
the
air.
~{~)···~·~~~---~'''-----¥_··-1
i !
~
v'
g
''-
';~~':F
~
Date
and
time.functio.n
lri,,::,~;!~;'(~~:,,~i
"Date and
time
settings
returrt)to'ffiei@llif{1i£\ff!ti!l
default
setting"..
i
L::~,::,,~!;:::,··<::~~
...
"
....
"_~.""
...
".j
• If the batteries are removed and left out of the
camera for about three days'2, the date and time
settings return to the default setting, and must
be reset.
'2
The
time until the date and time settings
return to the default setting varies depending
on
how
long the batteries have been loaded.
"Setting the date and time" (p.
13)
, ,
, ,
NO
PICTURE
Internal memory/Card problem
Take pictures before viewing
them.
OJ
PICTURE
ERROR
Problem
with
selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image file
is corrupted.
EN
To Next Page
Loading...
