When you are unsure
of
how to take a picture
that you envision, refer to the information below.
r-
~_
~,..J
Object with no vertical
lines'1
When extremely bright
objects appear
in
the
center of the screen
Subjects with low contrast
"Focusing on the SUbject"
• Taking a picture
of
a subject not in the center
of
the screen
After focusing
on
an
object at
the
same distance
as
the subject, compose
the
shot,
and
take
the
picture.
Pressing the shutter button halfway (p,
15)
• Set [AF MODE] (p, 28)
to
[iESP],
• Taking a picture
of
subjects where autofocus
is
difficult
In
the
following cases, after focusing on
an
object
(by pressing
the
shutter button halfway down)
with
high contrast
at
the
same
distance
as
the subject,
compose the shot,
and
take
the
picture.
'1
It
is also effective to compose the shot by holding
the camera vertically to focus, and then returning to
the horizontal position to take the picture.
Focusing
'1
Before erasing important images, download them to
a computer.
'2
All data will be erased.
'3
This is displayed, for instance, when the printer's
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
'4
This camera may be unable to print images taken by
other cameras.
OJ
Problem
with
selected
image
THE IMAGE
CANNOT
Use photo retouch software, etc.
BE
EDITED
to edit the image on a computer.
~D'
Operation
problem
Close the battery/card
CARD-COVER
compartment cover.
OPEN
CJ
Battery
problem
BATIERY
EMPTY
Charge the battery.
~
Connection
problem
Connect the camera and
NO
computer or printer correctly.
CONNECTION
Iii
Printer
problem
NO PAPER
Load paper into the printer.
~
Printer
problem
·0
Refill the ink
in
the printer.
NO INK
Sly
Printer
problem
JAMMED
Remove the jammed paper.
SETIINGS
Printer
problem
CHANGED'3
Return to the status where the
printer can be used.
Printer
problem
J!1
Turn off the camera and printer,
check the printer for any
PRINT ERROR
problems, and then turn the
power on again.
OJ
Problem
with
selected
image
CANNOT PRINT4 Use a computer to print.
EN
To Next Page
Loading...
