Nomenclature & Functions
19
i--SPEED LT, i--SPEED 2
3.2 Power Supply/Mains cable
Mains power cable
Power connector
1. ON--OFF switch
The 12VDC Power supply is s upplied with the appropriate AC
mains power cable. The power supply unit MUST be earthed
and it is recommended that the mains power cable s upplied is
used to maintain standards compliance.
2. Power connector
Connects to the ‘power’ socket of the camera and provides
power to the camera and its controller units
The user must ensure that only the power supply
unit supplied with the Olympus i-- SPEED LT,
i-- SPEED 2 is used and that this unit is only used
to power the camera.
The memory in the camera will be erased if
power is lost.
To Next Page
Loading...