Olympus i-SPEED LT - Measure Angular Velocity and Angle Menu

Software reference (CDU) i--SPEED 2
80
i--SPEED LT, i--SPEED 2
3. Measure Angular Velocity and Angle Menu
Access: Measure
' Measure Angular Velocity and Angle
Controls: Start Origin Clear Player Save Image
A"YB
S The CDU will display the playback image
` Start Control
This control marks the start of the measurement or calibration.
` Origin Control
This control marks the origin or axis of rotation for the
measurement of angle and angular velocity.
` Clear Control
This control clears all the currently marked points, to allow another
measurement to be taken. The control is disabled if there are no
marked points to clear.
`
A " Y B
These controls allow the user to move the measurement cursor.