Olympus i-SPEED LT - Config Menu; Language Control; TV Monitor Control; Calibrate Sensor Control

Software reference (CDU) i--SPEED LT
39
i--SPEED LT, i--SPEED 2
7. Config Menu
This menu makes available all the items which relate to the
configuration of the camera.
Access: i-- SPEED LT Home
' Setup ' Config
Options: Time/Date
Language TV Mode Calibrate
` Language Control
This control permits the user to set the language in which the
menus are displayed. The language of the information tiles and
control value display is not changed.
` TV Monitor Control
The composite video output connector (BNC) is able to provides
either NTSC or PAL and this selection is made by this control.
` Calibrate Sensor Control
In common with all CMOS sensor chips, the Olympus i-- SPEED LT
sensor requires a calibration system to remove fixed pattern noise.
This control allows the user to manually trigger the calibration
system. Further discussion may be found in Chapter 8 ”
Understanding the Olympus i-- SPEED 2’’.
NOTE
To successfully calibrate the sensor, the user must
cover the lens.