Olympus i-SPEED LT - Measure Speed & Distance Menu; Start Control; Clear Control; Save Image

Software reference (CDU) i--SPEED 2
79
i--SPEED LT, i--SPEED 2
2. Measure Speed & Distance Menu
Access: Measure
' Measure Speed & Distance
Options: Start Clear Player Save Image
A"YB
S The CDU will display the playback image
` Start Control
This control marks the start of the measurement or calibration.
` Clear Control
This control clears all the currently marked points, to allow another
measurement to be taken. The control is disabled if there are no
marked points to clear.
` Player Control
The player is presented here to allow the measurement of speed
and angular velocity, by permitting the user to move to a different
frame for the end point of the measurement.
` Save Image
This control causes an image to be saved to the compact flash
card. After an image is saved, the Card Management menu
automatically appears. Pressing the Back button from the Card
Management menu will cause the CDU to return to the Measure
Speed & Distance Menu. The image will be saved as a bitmap,
without JPEG compression.
`
A " Y B
These controls allow the user to move the measurement cursor.