44
5 Menu operations and functions
Inputting a title
The following are the two methods that can be used to input a title.
• Input text from the on-screen keyboard
• Select a preset title
Input text from the on-screen keyboard
123
1 Select the input mode and then press the [MEAS/ENTER] joystick.
2 Select the buttons of the characters you want and then press the [MEAS/EN-
TER] joystick.
The characters you input appear in the title input box. Edit the text as required.
● To delete characters
●
To delete a single character, move the cursor to it, select [DELETE], and then press the
[MEAS/ENTER] joystick.
●
To delete all input characters, select [CLEAR] and then press the [MEAS/ENTER] joystick.
● To input a space
Move the cursor to the location where you want to input the space, select [SPACE], and then
press the [MEAS/ENTER] joystick.
3 Select [EXECUTE] and then press the [MEAS/ENTER] joystick.
This displays the title you input on the LCD monitor.
Main menu
Sub menu Available settings
SETUP STEREO
ADAPTER IM-
AGE DISPLAY
MODE
Sets the screen in monocular view or binocular view
Sets the display mode of the live image to either the monocu-
lar view type or the binocular view type.
MONOCULAR IMAGE* : Displays the image in monocular view
(one screen)
BINOCULAR IMAGE : Displays the image in binocular view
(two screens)
This setting is reflected to RX (stereo measurement function) only.
See "Observing measurement area" (P. 60). for details of the
display mode.
*: Initial default
To Next Page
Loading...
