Need help?Do you have a question about the Olympus IPLEX G Lite and is the answer not in the manual?
General| Type | Industrial Videoscope |
|---|---|
| Monitor Size | 5.7 inches |
| Image Sensor | CMOS |
| Light Source | LED |
| Resolution | 640 x 480 pixels |
| Weight | 1.15 kg |
| Operating Temperature | -10°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Camera | Built-in |
| Insertion Tube Diameter | 4.0 mm / 6.0 mm |
| Probe Diameter | 4.0 mm / 6.0 mm |
| Probe Length | 2 m, 3.5 m |
| Working Length | 2 m, 3.5 m |
| Battery Life | 4 hours |
| Direction of View | Forward |
Strict compliance with precautions for safe handling and use.
Critical safety warnings for operation and potential hazards.
Precautions for insertion, handling, and attachment of components.
Precautions for operation, LCD monitor, and storage media.
Precautions when illumination is ON and optical radiation information.
DANGER and WARNING points for battery use and charging.
CAUTION and NOTE points for battery handling and storage.
Procedures for loading and using the battery.
Precautions and procedures for attaching optical adapters.
Procedures for attaching 4-mm and 6-mm type optical adapters.
Continued inspection items for adapters and carrying case.
Steps for turning the unit ON and selecting an optical adapter.
Steps for inserting, angulating, and observing the object.
Preparation steps for recording images, including media formatting.
Step-by-step guide to recording a still image.
Step-by-step guide to recording a movie.
Features and procedures for constant video recording.
Preparation steps for constant video recording.
Explanation of how scaler measurement works.
Steps for attaching adapters and performing scaler measurements.
Detailed steps for performing scaler measurements.
Explanation of stereo measurement and its requirements.
Flowchart outlining the steps for stereo measurement.
Procedure for attaching the stereo optical adapter.
How to register or re-register stereo optical adapters.
Steps to register a new stereo optical adapter.
Checking measurement values using the provided check tool.
Confirming the error range of measurement values against standard.
Observing measurement area in monocular or binocular view.
Measuring distance using spot ranging on live/freeze screen.
Specifying measurement points and recording results.
Exiting measurement and checking values.
Methods for measuring distance and point-to-line.
Methods for measuring depth and area/lines.
How to specify and move measurement points.
Procedure for removing and replacing the LED unit.
Guide for resolving common instrument errors.
Continued list of error messages and recommended actions.
Common issues encountered with the instrument and their solutions.
Procedures for requesting instrument repair from Olympus.
To Next Page
