Olympus IPLEX G Lite Operation Manual

Before handling this product, please read through and follow the instructions and precautions in the
instruction manual of the IPLEX G Lite.
This operation manual is an excerpt from the descriptions and instructions in the instruction manual
of the IPLEX G Lite, which include the setup procedures during the use of the product, the functions
of the basic operating components, descriptions on the indicator and menu displays, and safety
precautions.
Intended use
This instrument is intended for inspecting and observing the interior of machinery, equipment, materials,
and other objects, without damaging the object being inspected.
Setting up the IPLEX G Lite
This product can be set up easily for inspection to be performed immediately.
Simply follow the five steps below to complete the setup.
1. Removing components from the case
Hold and lift the main unit and the coiled insertion tube out of the case.
Main unit
IPLEX G Lite Operation Manual
B5A-2689-00
MM3212 01
Industrial Endoscope
1

Olympus IPLEX G Lite Specifications

General

Type	Industrial Videoscope
Monitor Size	5.7 inches
Image Sensor	CMOS
Light Source	LED
Resolution	640 x 480 pixels
Weight	1.15 kg
Operating Temperature	-10°C to 40°C
Storage Temperature	-20°C to 60°C
Camera	Built-in
Insertion Tube Diameter	4.0 mm / 6.0 mm
Probe Diameter	4.0 mm / 6.0 mm
Probe Length	2 m, 3.5 m
Working Length	2 m, 3.5 m
Battery Life	4 hours
Direction of View	Forward