What to do if I get a 'RECORDING MEDIA ERROR' on my Olympus IPLEX FX IV8420 Analytical Instruments?
If you receive a 'RECORDING MEDIA ERROR' message, it means that the recording media is either not formatted or the data you're trying to access is damaged. To resolve this, format the recording card or USB memory using the IPLEX FX.
Why does my Olympus IPLEX FX IV8420 display a message when using battery?
The message appears because the battery voltage has dropped. To fix this, immediately stop recording, copying, moving, deleting images, or formatting recording media and quickly replace the battery. Alternatively, plug in the adapter.
How to fix ERROR (AD1) on Olympus Analytical Instruments?
ERROR (AD1) indicates an abnormality in the scope tip electrode or optical adapter electrode. Immediately withdraw the scope from the object of observation and turn the power off. Clean the scope tip and optical adapter electrodes, and then reinstall the optical adapter.
Why does the self-check trigger during use and display a message on my Olympus IPLEX FX IV8420?
This occurs because heat has built up inside the base unit, triggering the self-check function. Terminate the inspection, allow the instrument to cool down, and then turn the power back on again. If you are using battery power, replace the battery.
Why DETAIL image cannot be recorded or retrieved on Olympus IPLEX FX IV8420 Analytical Instruments?
The internal memory card is not formatted or the data being accessed is damaged. Try again, or turn power off and then back on again.
What does 'RECORDING MEDIA NOT READY' mean on my Olympus IPLEX FX IV8420 Analytical Instruments and how do I fix it?
The message 'RECORDING MEDIA NOT READY' means that you tried to access the recording media without any inserted, or the recording media was removed during operation. Insert a recording card or USB memory to use and restart operation.
Why am I getting a message while increasing the light emitted by the scope on my Olympus Analytical Instruments?
The distal end of the scope is hot. Wait until the scope distal end cools before using it.
What does ERROR (D1) mean on my Olympus IPLEX FX IV8420?
ERROR (D1) means that the self-check function is activated and urges termination of inspection. Stop inspection and turn the instrument off then on again.
Why is the angulation operation extremely heavy on my Olympus IPLEX FX IV8420?
The insertion tube is overloaded and the self- check function was triggered to prompt termination of inspection. Extend the insertion tube as much as possible to reduce the loop amount, and turn power back on without operating the [ANGLE] joystick.
What does it mean when a message appears when the scope is inserted into a high-temperature observation object with Olympus IPLEX FX IV8420 Analytical Instruments?
The message informs you that the self-check function was triggered to prompt termination of inspection. Immediately pull the scope out of the observation object.
Specifies applications, limits, and manual usage guidelines.
Lists critical safety warnings, dangers, and operating environment details.
Safety guidelines for batteries and overview of product models.
Details parts and functions of the base unit.
Preparing power sources and inspecting the scope, adapter, and hook assembly.
Procedures for turning the system on and checking basic display functions.
Procedures for attaching the hook assembly and inserting the scope.
Performing 3D measurements using stereo optical adapters.
Measuring object length using a reference length without stereo adapters.
A guide to resolving common issues and error messages.
Lists specific error codes, their possible causes, and remedies.
Procedures and contact information for sending the instrument for repair.
General| Brand | Olympus |
|---|---|
| Model | IPLEX FX IV8420 |
| Category | Analytical Instruments |
| Language | English |
To Next Page