88
Chapter 4 Basic operations
4.7 Replaying the image
Quick replay of most recent image
Press the [VIEW] button in the live screen to display the most recently recorded
image in full screen (the retrieve screen).
Displaying the thumbnail screen and selecting the image
to be replayed
The example describes displaying images recorded on a recording card.
1 Insert the recording card containing the image to be displayed in
the RECORDING CARD slot.
2 Press the [VIEW] button for at least 2 seconds to open the
thumbnail screen.
The thumbnail screen shows the available recording card capacity in % (see
“Remaining media capacity” below).
When searching for an image (see page 122), the search indicator is displayed.
The thumbnail screen shows the file name, serial number, and recording date of
each thumbnail image. The AUDIO indicator is displayed for still images with
audio, the MOVIE indicator is displayed for moving images, the MEASURE
indicator is displayed for images with stereo measurement results, and the
NOTE indicator is displayed for images with notes (see below).
Recording date
MOVIE image
indicator
MEASURE
indicator
AUDIO indicator
SEARCH indicator
File name serial numberFolder name
Folder tab
Thumbnail
selection frame
Remaining media
capacity
Drive tab
NOTE indicator
To Next Page
Loading...
