89
Chapter 4 Basic operations
3 Move the thumbnail selection frame with the [MEAS/ENTER]
joystick to select the desired thumbnail image.
If more than nine movies are recorded in one folder and the thumbnail selection
frame is on the top (bottom) thumbnail which is the first (last) image in the folder,
tilting the [MEAS/ENTER] joystick up (down) moves the thumbnail selection
frame to the last (first) image in the folder.
4 To change the folder
In the thumbnail screen, tilt the [MEAS/ENTER] joystick to the left to select the
folder tab when the thumbnail image on the left edge is selected. Then tilt the
[MEAS/ENTER] joystick up or down to select the desired folder.
If you want to add or change the name of a folder on the memory card, see “Add/
rename/delete folder” (page 124).
When more than four folders have been created, tilting the [MEAS/ENTER]
joystick up (down) while the first (last) folder tab is selected, moves to and
selects the last (first) folder tab.
5 To change the drive
When a folder tab is selected, tilt the [MEAS/ENTER] joystick further to the left to
select a driver tab. Then tilt the [MEAS/ENTER] joystick up or down to select the
drive in which to record the image.
NOTE
• “D:\” is not displayed if a USB memory is not inserted.
Recording card
Internal memory
USB memory
Recording destination indicator
To Next Page
Loading...
