72
Chapter 4 Basic operations
4.4 Withdrawing the scope
WARNING
• The distal end of the scope becomes hot just after use in high-temperature atmospheres. Do
not touch it directly to avoid burns.
CAUTION
• Do not withdraw the scope while its angulation is locked or while your finger is placed on the
[ANGLE] joystick. Otherwise, the scope and/or observation target may be damaged.
• If the scope is caught by something during withdrawal, turn the control unit gently while
continuing the withdrawal. Do not use excessive force to avoid damaging the scope or the
object you are inspecting.
Releasing the angulation lock
If the angulation lock is activated, press the [ANGLE/LOCK] lever to release it.
[ANGLE LOCK] lever
To Next Page
Loading...
