Olympus IPLEX G Lite - Cleaning Components - Distal End; Cleaning Components - Optical Adapter

4
Cleaning the LCD monitor
LCD monitor viewing problems due to fingerprints and dirt
Wipe the LCD monitor with a soft cloth moistened with clean water. Then, lightly wipe it with a
clean and dry cloth.
NOTE
●
Never use a chemically treated cloth or strong detergent, such as benzine or alcohol.
Otherwise, the surface of the LCD monitor may be damaged.
●
Do not use a cloth that is hard, dirty, or has foreign substance on it. Otherwise, the surface
of the LCD monitor may be damaged.
5
Cleaning of other units
If the main unit is dirty, wipe it with a soft cloth moistened with clean water. Then, lightly wipe it
with a clean, dry cloth. Wipe away any dirt or water droplets on the inner face of the battery
compartment and interface doors, as well as the mounting parts of the main unit.
Air-blow to remove dust and the like from the areas around the lens and terminals of the LED
unit without touching them directly.
9-4 Storage precautions
Store this product under normal room temperature and humidity.
1 Turn OFF the power and remove the battery or unplug the AC adapter.
2 Store the instrument on a level surface in a clean, dry and stable place.
IPLEX G Lite
97