33
4 Basic operation
Recording a still image
File names
File names using the folder names of the save destination are assigned to images, and such im-
ages are stored in the folder of the save destination in the USB flash drive.
You can change a file if you want (up to 30 alphanumeric characters and symbols).
Recording folder name?????.***
5-digit file name serial number
The file number is assigned sequentially from 00001 to 99999.
File name extension
".JPG" for still image files, ".AVI" for movie files.
● You can use the FILE NAME MARK menu to specify addition of the letter "_A", "_B", "_C" or "_D" at the
end of image file names. Use this function to categorize image files.
● The category names of the file marks can be changed.(Contact Olympus for details.)
NOTE
1 Select the folder of the save destination.
See "4.3 Switching the folder from the live screen" (P. 31) for details about operations.
2 While a live image is displayed, short-press the [FRZ/REC] button.
This freezes the image.
3 While the freeze screen is displayed, long-press the [FRZ/REC] button again.
The name of the recording folder appears.
4 Check the name of the folder, select [YES] and short-press the [MEAS/ENTER]
joystick.
If you want to change the folder, select [MODIFY], change the folder of the save destination and
short-press the [MEAS/ENTER] joystick.
5 Select the mark to add to the end of the file name of the image you are record-
ing, short-press the [MEAS/ENTER] joystick.
To Next Page
Loading...
