■ Select a preset title for input
With this procedure, you can select a preset character string and use it to input a title.
1 Select [PRESET].
A list of preset titles is displayed. To cancel the preset title selection, press the [x] button to
close the screen.
2 Select the strings from the preset title list.
The text string you selected appears in the title input box and the list is closed.
Repeat steps 1 and 2 to complete inputting of the title.
TIP
The preset title list has nine pages. To change pages, select the text string in line 1 or line
6 of the currently displayed page, and then push the [MEAS/OK] joystick upward or
downward, or press the up button or the down button on the right side of the screen.
3 Select [EXECUTE].
The title you selected is displayed on the live/freeze screen.
60
To Next Page
Loading...