Olympus OEV143 - General and Model Specifications

21
General
Classification of equipment
– Evaluated to EN60601-1, EN60601-1-2, UL2601-1 (First
Edition), CSA601.1
– Type of protection against electric shock
Class I equipment
– Degree of protection against harmful ingress of water
Ordinary equipment
– Degree of safety of application in the presence of a
flammable anaesthetic mixture
Not protected equipment
– Mode of operation Continuous operation
– Information concerning type and frequency of technical
maintenance Not need maintenance equipment
– Main power switch Functional switch
CRT P-22 phosphor
Operating conditions
0 to +40°C (32 to 104°F) Temperature
700 to 1,060 hPa Pressure
30 to 85% (no condensation) Humidity
Transport and Storage conditions
–20 to +60°C (–4 to 140°F) Temperature
700 to 1,060 hPa Pressure
0 to 90% Humidity
Accessories supplied
AC power cord (1)
AC plug holder (1)
Side Cover (2)
Control panel cover (1)
Panel hinge (2)
Instructions for Use (1)
For OEV143:
Power requirements 1.2 ~ 0.5A
100 to 240 V AC, 50/60Hz
1)
Dimensions (w/h/d) Approx. 346 × 340 × 431 mm
(13
5
⁄8 × 13
1
⁄2 × 17 inches)
not incl. projecting parts and controls
Mass Approx. 17kg (37 lb 8 oz)
For OEV203:
Power requirements 1.5 ~ 0.6A
100 to 240 V AC, 50/60Hz
1)
Dimensions (w/h/d) Approx. 450 × 458 × 503 mm
(17
3
⁄4 ×18
1
⁄8 × 19
7
⁄8 inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Design and specifications are subject to change without
notice.
1) Use a proper power cord for your local power supply. (See page 3.)
..........................................................................................................................................................................................................
c