EN 12
En
Install the strap.
Install the strap on the Case body.
Master the basic operation.
Please master the basic operation of the Case before taking pictures.
Holding the Case
Hold the Case securely with both hands, keep your elbows close to your
body, and hold the Case so that you can confirm the picture on the LCD
monitor of the digital camera through the LCD monitor window of the
Case.
CAUTION:
Please install the strap correctly as shown above. OLYMPUS IMAGING
CORP. shall bear no responsibility for damage etc. caused by dropping the
Case because of incorrect installation of the strap.
CAUTION:
• Do not exert excessive force onto the lens window or the lens ring.
• Take care not to put your fingers etc. over the lens window and the flash
diffuser.
Hand strap ring
Hand strap
Installation illustration Installation completed
Good example Bad example
PT-043_EN.book Page 12 Friday, December 7, 2007 5:30 PM
To Next Page
Loading...
