EN 20
En
Confirm the shooting scene and shooting mode.
Mounting and removing the lens cap.
CAUTION:
If the camera does not function properly, reinstall the digital camera
following the procedures of “Check the digital camera.” (P.16) of this manual.
When using the Case, the current
camera shooting scene and
shooting mode can be confirmed on
the camera’s LCD monitor.
Fit the lens cap onto the lens ring as
shown in the figure. Be sure to
remove the lens cap before
shooting.
Shooting scene/Shooting mode
PT-043_EN.book Page 20 Friday, December 7, 2007 5:30 PM
To Next Page
Loading...
