EN 38
En
Specifications
* We reserve the right to change the external appearance and the
specifications without notice.
Q12: What are the model names of the accessories for the PT-043?
A12: The following accessories are being sold.
1 O-ring for the PT-043 body (POL-042): This is a silicone rubber
O-ring packing to be installed in the PT-043 body to make it
waterproof. O-rings for other Case models cannot be used.
2 Silicone grease (PSOLG-1/2/3): This is a grease for silicone O-
ring maintenance.
3 Silica gel (SILCA-5S): This is a desiccant used to prevent
fogging of the glass parts of the Case. The quantity is five bags.
4 LCD hood (PFUD-07): This hood is installed on the LCD
monitor window of the Case to facilitate the viewing of the LCD
monitor of the camera.
* Please contact your dealer or a service station of our
company when replacement is required. Replacement will
be made against payment.
* The PT-043 is not provided with a balance weight.
Compatible models Olympus digital camera
µ 1030 SW/Stylus 1030 SW
Pressure resistance Depth of up to 40 m
Main materials Body: Transparent polycarbonate
Buckles: Stainless steel
Grip/Shutter lever/Operation buttons:
Polycarbonate
Lens window: FL glass
Operation button shafts: Stainless steel
Diameter of lens ring ∅52 mm
Dimensions Width 134 mm x height 106 mm x thickness
70.5 mm (projections not included)
Weight 355 g (camera and accessories not included)
PT-043_EN.book Page 38 Friday, December 7, 2007 5:30 PM
To Next Page
Loading...
