Changing the shooting
information disp/ay
Tile display of the screen information can be
changed to best match the situation, such as
for the need of clear view of the screen or for
making a precise composition by using the grid
display.
Press the DISR button.
• The displayed shooting information changes in
the order shown below each time the button is
pressed. "Shooting mode display" (p. 8)
Normal Histogram
@
.........Using the _UNC menu
The FUNC menu provides the following menu
functions that can be quickly called and set.
• [WB] (p. 28) • [ESP/[_}] (p. 29)
• [ISO] (p. 28) * [{_, IMAGE QUALITY] (p. 27)
• [DRIVE] (p. 28)
Press the _ button,
No information Grid
2 Use _ to select the menu
function and _ to select the
setting option, and then press the
button to set.
Reading a histogram
If the peak fills too much of the frame,
the image will appear mostly white.
If the peak fills too
much of the frame,
the image will
appear mostly black.
The green section shows
the luminance distribution in the
center area of the monitor.
EN
To Next Page
Loading...
