Recording sound when shooting still Brightening the subject against
images [_] backlight [SHADOWADJ]
......._:_CAMEBA ........ .................................
C_ : it_ ,_:_!_1 0 : I_1 ,SeN BEAUTY
No sound is recorded.
The camera automatically starts
recording for approx. 4 seconds
ON after taking the picture. This is
useful for recording notes or
comments about the p cture.
_ When recording, aim the microphone (p. 6)
at the source of the sound you want to
record.
Reducing the blur caused by the
camera shake when shooting
[IMAGE STABILIZER] (still images) /
[DIS MOVIE MODE] (movies)
?_iCAMERA MENU _ IMAGE STABILIZER /
........DIS MQ_IE MQDE ............................
_ : _ sen BEAUTY
ON
Shoots without using [SHADOW
ADd].
The camera finds a person's
face that has been darkened by
backlight and makes it appear
brighter for taking the picture.
(Point the camera toward the
subject. Check the frame that
appears around the face detected
by the camera, and then press the
shutter button to take the picture.)
(_ For some subjects, the frame may not
appear or may take some time to appear.
When set to [ON], [ESP/E_] (p. 29) is
automatically fixed to [ESP], and [AF
MODE] (p. 29) is automatically fixed to
[FACE DETECT].
OFF
ON
®
®
®
®
EN
The image stabilizer is deactivated.
This is recommended for shooting
when the camera is fixed in place
on a tripod or other stable surface.
The mage stab zer s actvated.
The camera's default settings are [IMAGE
STABILIZER] (still images) to [ON] and [DIS
MOVIE MODE] (movies) to [OFF].
While [IMAGE STABILIZER] (stilt images)
is set to [ON], noises may occur from the
inside of the camera if the shutter button is
pressed.
Images may not be stabilized if camera
shake is too severe.
When the shutter speed is extremely stow,
such as when taking still shots or taking
pictures at night, the stabilizer may not be
as effective.
When shooting while the [DIS MOVIE
MODE] (movie) is set to [ON], the image will
be enlarged somewhat before saving.
To Next Page
Loading...
