Olympus STYLUS TOUGH-6000 - Resetting the file name numbers of pictures [FILE NAME]; Adjusting the CCD and the image processing function [PIXEL MAPPING]

Resetting the file name numbers of Adjusting the CCD and the image
pictures [FILE NAME] processing function
........ [PIXEL MAPPING]
Folder name
DCIM
Folder name File name
!.JPg
.jPg
Automatic Automatic
numbering numbering
-- Month: 1 to C
(A=October,
B=November,
C=December)
......._,_8BIUB _ B!XSLMABB!NG................................................................
_ This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended,
_ For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and the image
processing function
Press the _ button when [START]
(Submenu 2) is displayed.
• Thecamerachecksand adjuststheCCD andthe
imageprocessingfunctionatthe sametime.
Day: 01 to 31
AUTO
This resets the sequential number
for the folder name and file name
whenever a new card is inserted. _1
This is useful when grouping
images on separate cards.
Even when a new card is inserted,
this continues the numbering for
the folder name and file name from
the previous card. This is useful for
managing all image folder names
and files names with sequential
numbers.
The number for the folder name is reset to 100, and
the one for the file name is reset to 0001.
E.