Saving battery power between shots Using the LED illuminator as an
[POWER SAVE] auxiliary light [LED ILLUMINATOR]
......... .....................LEO !LLUM!NATOe ..........
Cancels [POWER SAVE].
When the camera is not being
used for approx. 10 seconds, the
ON monitor automatically turns off to
save battery power.
ON
Disables the LED illuminator.
Enables the LED illuminator.
_) "Using the LED illuminator" (p. 22)
To resume standby mode
Press any button or turn the mode dial.
Operating the camera by tapping the body [TAP CONTROL]
......._ SE_UR _ TAR GON!BOL ....
Cancels [TAP CONTROL].
ON [TAP CONTROL] is activated.
Adjusts the tap strength and intervals between multiple taps on each side of the camera
CALIBRATE body. top, eft, rght, & back
Functions available when [TAP CONTROL] is set to [ON]
Camera's top [TOP]: Tap twice
• Confirms the selected menu.
• Switches [TAP CONTROL] to [ON] or [OFF]. (p. 4)
Camera's left sideTap[LEFT]:onceI_
Sets the macro mode. (p. 21)
Camera's back [BACK]: Tap once
Switches to playback mode. (p. 47)
_11 Camera's right side [RIGHT]: Tap once
Sets the flash mode. (p. 20)
EN