Selecting the video signal system to match your TV [VIDEO OUT]
_) The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV's video signal type.
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on
PAL Connecting the camera to a TV in European countries, China, and so on
_ The factory default settings differaccording to the region where the camera is sold.
To play back camera images on a TV
d_,Connect the TV and camera.
.......
audio input jack (white).
AV cable (supplied)
Connector cover
Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
3j Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera)."
Fordetails on changing the input source of the TV,refer to the TV's instruction manual.
4j Set the mode dial to [_, and use _ to select the image for playback.
_ Dependingon the TV's settings, the displayed images and information maybecome cropped.
E.
To Next Page
Loading...
