Adjusting the brightness of the monitor Setting the date and time for another
[I..l_J] time zone [DUAL TIME]
To adjust the monitor brightness
J_,Use _1_ to adjust the brightness while
viewing the screen, and then press the
button,
_[_ By setting [DUALTIME] to [ON] and setting
the date and time, the set date and time is
reflected in the image file names, date prints
and so on.
ON
.........................................Switches to the date and
-- time set in [(_::)] (Date/
time).
Switches to the date
(Proceeds and time that were set in
to the [DUALTIME] when using
setting
screen.L) the camera in another
time zone.
Setting the date and time [_:)]
_ "Setting the date and time" (p. 13)
_ The setting procedure is identical to that in "Setting
the date and time" (p. 13).
_ The date display order is the same as that
set with [_].
To select the date and time display
order
J_,Press _ after setting "Minute", and use
_ to setect the date display order.
Date orde_
I CANCEL*_ SET*_
EN