Olympus SZ3060 - A. OUTLINE OF PRODUCT; 1. OUTLINE OF MERCHANDISE; 2. FEATURES; 3. USING CONDITIONS

SZ-CHI
A.
OUTLINE OF PRODUCT
1. Outline of Merchandise
This is attached to a tube body for observing a flaw, pattern, interference
calor, etc. which can not be seen with ordinary illumination. It is used
in the semiconductor and meta~ industry fields.
2. Features
(1) Polarizing plate and quarter wave plate are provided to illuminate a ·
specimen along the observation optical axis. This enables observation of
a flow on metal surface, IC chip circuit, liquid crystal pattern, etc.
which can not be observed before.
(2) Interference calor is created on a thin film like a metal microscope, and
the IC circuit pattern structure can be observed with sharp contrast.
(3) Specimen such as an ore which has polarization can be. observed easily ~ith
a vertical polarizing light.
(4) Incident polarizing state is the same in left and right, the brightness
and calor differences are minimum in the left and right optics.
(5) The illuminator is mounted compact on a tube body, and not obstructive
when attached to various industrial equfpments.
3. Using Conditions
(1) Operating temperature: 0 - 40°C (32-104°F)
(2) When using an auxiliary objective lens, attach the quarter waver plate to
its bottom end.
(3) Usable auxilia~y objective lenses and zoom magnifications are as shown in
the table below.
~
s z 3 0.
4 0
s z 6 0
s z 1
1
lOX
20X
3QX
10X
2QX
10 X 20 X
Microscope
6
6 6
0 0
0 0
only
0. 25
X
X
X
6
----
----
----
----
0. 3
X
X
6 6
-----
----
-----
-----
0. 4
X
X
6
6
----
----
----
~
0. 5
X
X
6 6
6 6
6 6
0. 62
X
6
6
6
-----
----
----
-----
0. 75
X
6
6 6
-----
----
-----
~
1.5
X
6
6
0
6
0
6
0
2
X
0
0
0
6 6
6
0
o Visual field is met in all the zoom range.
A Visual field is met with high zoom magnification.
x Visual field is not met in all the zoom range.
A-1