SZX7
22
9-4 Stage Adapter Type 1 SZH-STAD1
The SZH-STAD1 is an adapter providing the similar function to the BX stage adapter type 1 (SZX-STAD1). The difference is
that the stage usable for the SZH-STAD1 is the BH2-SH horizontal knob stage.
The installation and polarizer (SZX-PO or SZ-POL-2) mounting methods are identical to those for the SZX-STAD1. Please
read the previous section (page 21).
9-5 Up/Down Moving Stage SZ2-FO
1
Associated Module System Chart
Up/Down Moving Stage
SZ2-FO
Standard Stand
SZ2-ST, etc.
}When using a filter or simplified polarized light system in combination with the transmitted illumination stand, mount the
filter holder or polarizer on the stand before installing the up/down moving stage.
}The up/down moving stage can also be mounted so that the focus adjustment knob comes on the side of the observer
(180° opposite to the orientation shown in the above figure).
Modules Mountable on the SZ2-FO
· Stage plate : SZ2-SPBW, SP-C
· Stand : SZ2-ST, SZX-ST, SZ-STL, SZX-STL, SZX illumination stand series
· Stage : SZH-SC, SZH-SG*
*The front/rear movement is possible only on the front side of the center because the focus adjustment
knobs of the SZ2-FO come in the way.
Stage plate
Gliding Stage
SZH-SG
Cup Stage
SZH-SC
To Next Page
Loading...
