27
EN
White balance Sets an appropriate color scheme for the light of the shooting scene.
e
WB Auto The camera automatically adjusts the white balance.
f
Sunny Suitable for shooting outdoors under a clear sky.
g
Cloudy Suitable for shooting outdoors under a cloudy sky.
h
Incandescent Suitable for shooting under tungsten lighting.
Fluorescent Suitable for shooting under white uorescent lighting.
Z
Underwater Suitable for underwater shooting.
X
One Touch 1 For manually adjusting the white balance according to the light when shooting. Set
a piece of white paper or other white object so that it lls the entire screen, and
press the button to set the white balance. For how to register one touch white
balance, see “Registering one touch white balance” (p. 28).
Y
One Touch 2
ISO sensitivity Sets the ISO sensitivity.
l
ISO Auto The camera automatically sets the sensitivity with priority on image quality.
m
High ISO
Auto
The camera automatically sets the sensitivity with priority on minimizing blur caused
by a moving subject or by camera shake.
Q to P
Value Set a smaller value to reduce noise in the picture, or a larger value to reduce blur.
Drive Sets the sequential shooting function.
o
Single One frame is shot each time the shutter button is pressed.
j
Sequential The images are taken sequentially while holding down the shutter for up to 100
frames.
c
High-Speed1 The camera takes sequential shots at approximately 15 frames/sec.
d
High-Speed2 The camera takes sequential shots at approximately 60 frames/sec.
Image size Sets the number of recording pixels.
5
3968×2976 Suitable for printing pictures over A3 (11×17 in.).
4
3200×2400 Suitable for printing pictures up to A3 (11×17 in.).
3
1920×1440 Suitable for printing pictures up to A4 size (8.5×11 in.).
7
640×480 Suitable for using pictures on emails.
To Next Page
Loading...
