28
EN
Aspect Sets the horizontal-to-vertical ratio of images.
u
4:3
Change the horizontal-to-vertical ratio when taking pictures.
v
16:9
w
3:2
x
1:1
Ɣ In certain shooting modes, some functions cannot be set. Refer to “List of settings available in each shooting
mode” (p. 73).
Ɣ Examples of image size when the aspect ratio is 4:3.
Registering one touch white balance
Select [
X
One Touch 1] or [
Y
One Touch 2], face the camera toward a piece of white paper or other white
object, and press the button.
Ɣ The camera releases the shutter and the white balance is registered. When the white balance was
previously registered, the registered data is updated.
Ɣ The registered white balance data will not be cleared by turning off the power.
Ɣ Perform this procedure under the light where the pictures will be actually taken.
Ɣ When the camera settings are changed, the white balance must be registered again.
Ɣ When the white balance cannot be registered, check that the white paper lls the screen, and then
perform the procedure again.
To Next Page
Loading...
