Connecting to a Computer
7
116
EN
7
Connecting the Camera to a Computer
Micro-USB connector
USB cable USB port
Smaller terminal
• When the camera is connected to a computer via USB, a dialog should be displayed in
the monitor prompting you to select a host.
• If nothing is displayed on the camera screen even after connecting the camera to the
computer, the battery may be exhausted. Use a full-charged battery.
• If the camera cannot connect to PC, disconnect and reconnect the cable.
• The battery can be charged while the camera is connected to the computer via USB.
The charging time varies depending on the performance of the computer. (There may be
cases in which it takes approx. 10 hours.)
Connecting to a Computer
To Next Page
Loading...
