EasyManua.ls Logo

Olympus THUNDERBEAT TB-0545PC - Page 63

Olympus THUNDERBEAT TB-0545PC
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
App.
EMC information
59
TB-0545PC/IC/FC, TB-0535PC/IC/FC, TB-0520IC, TB-0510IC
INSTRUCTION MANUAL
Cautions and recommended electromagnetic environment
regarding portable and mobile RF communications equipment,
such as cellular phones
NOTE
Where “P” is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer, and “d” is the recommended separation
distance in meters (m).
This instrument complies with the requirements of IEC 60601-1-2: 2001. However,
under an electromagnetic environment that exceeds its noise level,
electromagnetic interference may occur on this instrument.
Electromagnetic interference may occur on this instrument near a high-frequency
electrosurgical equipment and/or other equipment marked with the following
symbol:
Immunity test
IEC 60601-1-2
test level
Compliance
level
Guidance
Conducted RF
IEC 61000-4-6
3 Vrms
(150 kHz – 80 MHz)
3V (V
1
) Formula for recommended separation distance
(V
1
=3 according to the compliance level)
Radiated RF
IEC 61000-4-3
3V/m
(80 MHz – 2.5 GHz)
3 V/m (E
1
) Formula for recommended separation distance
(E
1
=3 according to the compliance level)
80 MHz – 800 MHz
800 MHz – 2.5 GHz
d
3.5
V
1
-------- -
P
=
d
3.5
E
1
-------- -
P
=
d
7
E
1
-----
P
=