ii
Observation tube
Microscope frame
BX40
BX50
Drawing attachment
U-DA
Magnification
changer
U-CA
U-ECA
Intermediate
tube
for AN360
U-OPA
Polarized light
intermediate
tube
U-CPA
Reflected
illuminator
U-RLA
Universal
illuminator
BX-URA2
Fluorescence
lluminator
BX-RFA
Microscope frame
BX41
BX51
BX52
Microscope frame
BX60
BX45
Universal
illuminator
U-URA
1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and wipe
gently using a piece of cleaning paper (or clean gauze).
If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute
alcohol.
Since the absolute alcohol is highly flammable, it must be handled carefully.
Be sure to keep it away from open flames or potential sources of electrical sparks --- for example, electrical
equipment that is being switched on or off.
Also remember to always use it only in a well-ventilated room.
2. Never wipe the mirror with gauze, etc. Fine dust accumulated on the surface should be blown off with a blower.
3. When not using the attachment, attach the light excluding cap to the mirror housing and keep the attachment covered
with a dust cover.
2 Maintenance and Storage
If the equipment is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the
equipment may also be damaged. Always use the equipment as outlined in this instruction manual.
The following symbols are used to set off text in this instruction manual.
: Indicates that failure to follow the instructions in the warning could result in bodily harm to the
user and/or damage to equipment (including objects in the vicinity of the equipment).
# : Indicates that failure to follow the instructions could result in damage to the equipment.
} : Indicates commentary (for ease of operation and maintenance).
3 Caution
To Next Page
Loading...
