Olympus VN-741PC - Turning the power ON; Setting the time;date

1
9
EN
Setup
Setup
Turning the power ON
1
Slide the POWER switch to the
[ ON ] position.
POWER switch
TIP
• When [Language] appears in the
display after turning the power ON,
press the + or – button to change the
display language and press the `OK
button to finalize the setting.
Setting the time/date
1
Press the 9 or 0 button to
select the item to set.
2
Press the + or – button to change
the number.
• To change the setting of another item,
press the 9 or 0 button to move
the blinking cursor, then press the + or
– button to change the number.
3
Press the ` OK button to finalize
the setting.
TIP
• Y
ou can press the `OK button during
the setting procedure to set the items
entered so far and start the clock.