Olympus VP-10 - Connection (Model A514)

1
Setup
11
EN
Setup
Charging the battery by connecting to an AC adapter with a USB connection
(model A514)
The battery can be recharged by connecting the recorder to the provided AC adapter (A514).
NOTE
• Bef
ore charging the battery, insert the
rechargeable battery provided and set
[Battery] to [Ni-MH].
• Before connecting the AC adapter,
release HOLD mode (☞P.30).
1
Remove the USB connector cover.
1
2
Slide open the USB connector cover using the
pad of your finger.
2
Connect the voice recorder to
the USB connector on the AC
adapter.
To USB connector
of AC adapter
(model A514)
3
Connect the AC adapter to an AC
power outlet.
To an AC power
outlet
4
Press the OK button to start
charging.
• Press the OK button while this
message is blinking.
• The LED indicator light lights while
charging.
5
Charging has finished when
[ Battery full ] appears.
NOTE
• U
se only the Olympus USB connecting
AC adapter model provided (A514).