Olympus VP-10 - Setting the Date;Time

1
Setup
9
EN
Setup
Setting the date/time
1
Press the 9 or 0 button to
select the item to set.
2
Press the + or – button to change
the number.
• To change the setting of another item,
press the 9 or 0 button to move
the blinking cursor, then press the + or
– button to change the number.
3
Press the OK button to finalize
the setting.
TIP
• Y
ou can change the clock display
format. See “Setting the date/time
[Time & Date]” (☞ P.47) for the
procedure.