Olympus VP-10 - Preventing Accidental Operation; Setting HOLD Mode; Releasing HOLD Mode

3
Preventing accidental operation
30
EN
Setting the voice recorder to HOLD mode maintains the current operation and disables button
operations. HOLD mode is a handy feature for preventing unintentional operation from
accidental button presses when the voice recorder is carried in a bag or pocket.
Setting HOLD mode
1
Slide the POWER / HOLD switch to
the [ HOLD ] position.
• [Hold] appears in the display, and the
recorder enters HOLD mode.
Releasing HOLD mode
1
Slide the POWER / HOLD switch to
position A shown below.
a
NOTE
• When an
y button is pressed during HOLD mode, [Hold] appears in the display for 2
seconds. No other operation is performed.
• Setting HOLD mode during voice recorder playback continues the playback operation
and prevents any other operation from being performed (the voice recorder stops when
playback ends).
Preventing accidental operation