Olympus VP-10 - Disconnecting the Voice Recorder from a PC

5
PC connection/disconnection
60
EN
PC connection/disconnection
Disconnecting the voice recorder from a PC
Windows
1
Click [ ] on the task bar in the
lower right hand corner of the
screen and click [ Eject DIGITAL
VOICE RECORDER ].
• The letter used to identify the drive
will vary according to your PC.
• When the window indicating it is safe
to remove hardware appears, close the
window.
2
Check that the LED indicator light
of the voice recorder has stopped
blinking and then disconnect the
USB cable.
Macintosh
1
Drag-and-drop the removable
disk icon for the voice recorder
shown on the desktop to the
trash can icon.
2
Check that the LED indicator light
of the voice recorder has stopped
blinking and then disconnect the
USB cable.
TIP
• Y
ou can disconnect the USB cable and use the voice recorder before the battery is fully
charged.
NOTE
• T
o prevent the risk of data damage, never disconnect the voice recorder from the USB
port while the LED indicator light is flashing.