Olympus VR-370 - Initial Camera Setup Process; Powering On and Setting Language; Setting Date and Time

7
EN
Turning on the camera and
making the initial settings
When you turn on the camera for the fi rst time, a
screen appears enabling to set the language for the
menus and messages displayed in the monitor, and
the date and time.
To change the selected date and time, see “Setting
the date and time d [X]” (p. 40).
1
Press the n button to turn
on the camera, press FGHI
of the arrow pad to select your
language and press the A button.
2
Press FG of the arrow pad to
select the year for [Y].
X
MENU
Back
Y/M/D
Y M D Time
-- --
--
--
:..2013
Date and time setting
screen
3
Press I of the arrow pad to save
the setting for [Y].
X
MENU
Back
Y/M/D
Y M D Time
-- --
--
--
:..2013
4
As in Steps 2 and 3, press
FGHI of the arrow pad to
set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D]
(date order), and then press the
A button.
For precise time setting, press the A button as
the time signal strikes 00 seconds.
5
Press HI of the arrow pad to
select time zone and then press
the A button.
● Use FG to turn daylight saving time
([Summer]) on or off.
Summer
’13.02.26 12:30
MENU
Back