13
1
Setting Time/Date (Time&Date)
Changing the Time/Date
.....................................................................................................................................................
Note
• If you press the OK button during the setup operation, the recorder will save the items that were set to that
point..
1
Press the + or
–
button in the sub
menu screen, and select the
“Time&Date”.
See ☞ P.38, 68, 75 regarding the sub
menu.
2
Press the OK or 9 button.
The Time/Date screen appears. The hour
indicator flashes, indicating the start of
the Time/Date setup process.
Follow the same steps starting at step 1 in “Setting Time/Date”
(☞ P.12).
2
1
• You can choose the order of the year, month, day by pressing
the FOLDER/INDEX button while setting them.
Example: August 14, 2005
4
Press the STOP button to close the menu.
4
8M 14D 2005Y
(Initial setting)
2005Y 8M 14D14D 8M 2005Y
To Next Page
Loading...
